|
Normal topic
|
FOC Motor Detection Values Incorrect, PID Tuning Advice?
by bmwman91 on Mon, 2020-07-06 03:09 |
VESC Tool |
|
Normal topic
|
VESC 6 Mark III and Traxxas Summit Radio Receiver PWM / PPM Signals
by j98221@gmail.com on Fri, 2020-07-03 07:27 |
General discussion |
|
Normal topic
|
Runaway Motor with No BLE
by Marctwo on Thu, 2020-07-02 20:47 |
General discussion |
|
Normal topic
|
connecting vesc tool with Prototipo
by Govert on Thu, 2020-07-02 19:43 |
General discussion |
|
Normal topic
|
VESC 6 plus working but no servo response
by saspragkathos on Mon, 2020-06-29 17:28 |
VESC Firmware |
|
Normal topic
|
Firmware Updating to run X2 Pro remote for VESC6.6
by Caddy on Sat, 2020-06-27 19:30 |
VESC Firmware |
|
Normal topic
|
App Config disabled one side problem
by timfame11 on Sat, 2020-06-27 00:26 |
VESC Tool |
|
Normal topic
|
Dual VESC Firmware OTA update from mobile app help
by A2 on Wed, 2020-06-24 20:05 |
VESC Firmware |
|
Normal topic
|
How to confirm valid FOC operation?
by _johnny_ on Wed, 2020-06-24 11:29 |
General discussion |
|
Normal topic
|
Dual Motor Setup not working via CAN Bus (solved)
by acleon on Fri, 2020-06-19 00:03 |
VESC Tool |
|
Normal topic
|
75/300 R3 Power ON/OFF PINs and LED Status
by nice2cu on Wed, 2020-06-17 17:35 |
VESC Original Hardware |
|
Normal topic
|
Motor picks random direction when starting with HFI
by TechAUmNu on Tue, 2020-06-16 00:47 |
General discussion |
|
Normal topic
|
VESC Tool Makes my remote unusable
by IcecreamSamurai on Mon, 2020-06-15 01:49 |
VESC Tool |
|
Normal topic
|
Power loss after 30seconds.
by flyingbrike on Sun, 2020-06-14 22:50 |
Third Party Hardware |
|
Normal topic
|
What motors can i use with the vesc?
by bengce on Sun, 2020-06-14 22:28 |
General discussion |
|
Normal topic
|
run one motor and off other using uart data over bluetooth
by Raja Sharma on Sun, 2020-06-14 13:16 |
General discussion |
|
Normal topic
|
DRV Fault at high load
by mikoyas on Sat, 2020-06-13 15:43 |
General discussion |
|
Normal topic
|
PPM Arduino throttle AND UART Bluetooth Monitor AND brake lever for braking
by vescsci on Fri, 2020-06-12 10:55 |
General discussion |
|
Normal topic
|
How to update a VESC 4.10 with a 3.36 firmware?
by shingo.it on Tue, 2020-06-09 23:40 |
VESC Firmware |
|
Normal topic
|
vesc tool not giving me the right values
by spacemango on Tue, 2020-06-09 13:31 |
General discussion |
