|
Normal topic
|
wont gonnect
by rustman01 on Wed, 2025-11-05 19:26 |
General discussion |
|
Normal topic
|
firmware
by Muhammad Rifan on Tue, 2025-11-04 08:17 |
VESC Firmware |
|
Normal topic
|
VESC 6 EDU not working - possible component failure?
by johboe on Sat, 2025-11-01 10:46 |
VESC Original Hardware |
|
Normal topic
|
PID Speed Control Type
by User18 on Fri, 2025-10-31 19:35 |
VESC Tool |
|
Normal topic
|
VESC to spin motor after power up?
by A_Baum92881 on Fri, 2025-10-31 06:01 |
General discussion |
|
Normal topic
|
Vesc boost charging with external inductors
by Bunda on Wed, 2025-10-29 08:37 |
General discussion |
|
Normal topic
|
Hall sensor port repeatedly fried on original hardware
by Rc 44 on Fri, 2025-10-24 22:44 |
General discussion |
|
Normal topic
|
FOC detection.
by Roger Wolff on Tue, 2025-10-21 19:57 |
General discussion |
|
Normal topic
|
Communication with VESC DISPLAY
by toyuto on Wed, 2025-10-15 04:32 |
Projects incorporating VESC technology |
|
Normal topic
|
Charging Li-ion battery using the VESC Harmony 32S BMS
by sainihalj on Tue, 2025-10-14 14:42 |
General discussion |
|
Normal topic
|
About How to control the "FLIPSKY Dual FSESC6.7 PLUS"
by tonyH on Tue, 2025-10-14 11:35 |
General discussion |
|
Normal topic
|
Custom-made VESC PCB: High current sensor offset/Overcurrent fault during motor detection, possible hardware/firmware mismatch
by Chinmay Mulgund on Mon, 2025-10-13 13:56 |
General discussion |
|
Normal topic
|
BLE Connection Bug
by Gawarmel on Sun, 2025-10-12 11:02 |
VESC Tool |
|
Normal topic
|
Problem with Android app
by Er-Chispa on Wed, 2025-10-08 20:58 |
General discussion |
|
Normal topic
|
Help - physical switch to change profiles on ADC15
by SwissCanuck on Sun, 2025-10-05 13:59 |
General discussion |
|
Normal topic
|
IMU losing connection after VESC outputs current
by ejstokes111 on Sat, 2025-10-04 00:40 |
Projects incorporating VESC technology |
|
Normal topic
|
limited mode
by Satrio on Fri, 2025-09-26 16:31 |
VESC Tool |
|
Normal topic
|
2 Speed ADC control
by totalgeek9224 on Mon, 2025-09-22 19:47 |
General discussion |
|
Normal topic
|
Can't update firmware on VESC 6 Firmware 3.54
by tarifachris on Fri, 2025-09-19 02:57 |
VESC Tool |
|
Normal topic
|
Unstable current readings over VESC CAN (UART/USB are fine)
by vukstijepovic on Mon, 2025-09-15 16:59 |
General discussion |
