|
Normal topic
|
Motor picks random direction when starting with HFI
by TechAUmNu on Tue, 2020-06-16 00:47 |
General discussion |
|
Normal topic
|
VESC Tool Makes my remote unusable
by IcecreamSamurai on Mon, 2020-06-15 01:49 |
VESC Tool |
|
Normal topic
|
Power loss after 30seconds.
by flyingbrike on Sun, 2020-06-14 22:50 |
Third Party Hardware |
|
Normal topic
|
What motors can i use with the vesc?
by bengce on Sun, 2020-06-14 22:28 |
General discussion |
|
Normal topic
|
run one motor and off other using uart data over bluetooth
by Raja Sharma on Sun, 2020-06-14 13:16 |
General discussion |
|
Normal topic
|
DRV Fault at high load
by mikoyas on Sat, 2020-06-13 15:43 |
General discussion |
|
Normal topic
|
PPM Arduino throttle AND UART Bluetooth Monitor AND brake lever for braking
by vescsci on Fri, 2020-06-12 10:55 |
General discussion |
|
Normal topic
|
How to update a VESC 4.10 with a 3.36 firmware?
by shingo.it on Tue, 2020-06-09 23:40 |
VESC Firmware |
|
Normal topic
|
vesc tool not giving me the right values
by spacemango on Tue, 2020-06-09 13:31 |
General discussion |
|
Normal topic
|
Detection for a drone outrunner 515 kV and 775 kV
by MaksK on Thu, 2020-06-04 16:05 |
VESC Tool |
|
Normal topic
|
Sinusoidal commutation
by shaman on Wed, 2020-06-03 23:42 |
Feature Requests |
|
Normal topic
|
VESC Connect dongle alternatives
by Pimousse on Tue, 2020-06-02 15:32 |
General discussion |
|
Normal topic
|
Measurement of voltage and mah
by renaudbarbier on Sun, 2020-05-31 17:04 |
General discussion |
|
Normal topic
|
Do I need a motor with Hall sensor to use Vesc tool?
by greew on Sun, 2020-05-31 06:48 |
General discussion |
|
Normal topic
|
Why android app doesn't save the BALANCE settings in the motors profile? Is it a BUG?
by zmei116 on Sat, 2020-05-30 12:43 |
VESC Original Hardware |
|
Normal topic
|
Why android app doesn't save the BALANCE settings in the motors profile? Is it a BUG?
by zmei116 on Fri, 2020-05-29 23:31 |
VESC Original Hardware |
|
Normal topic
|
Input fields bug report
by DerKrawallkeks on Thu, 2020-05-21 17:06 |
VESC Tool |
|
Normal topic
|
Voltage on motor leads @ 0 throttle
by SimpleUnmanned on Thu, 2020-05-21 02:40 |
General discussion |
|
Normal topic
|
VESC 75/300 singnal connectors
by Mikko Valtonen on Tue, 2020-05-19 21:43 |
VESC Original Hardware |
|
Normal topic
|
VESC 6, astroflight 3215, loosing sync with freewheel
by Rouckie on Mon, 2020-05-11 00:22 |
VESC Original Hardware |
