Hi, i have vesc from hobbyking hw. 4.12
When i downloaded vesc tool i must flash new fw (3.38)
After flash my vesc in vesc tool show fw:4.10 and i cant complete motor wizard. In motor detection i have: detection failed and motor is dead.
After this i write faults in terminal, this is output:
Fault : FAULT_CODE_DRV
Current : 0.2
Current filtered : 0.2
Voltage : 41.82
Duty : 0.008
RPM : 0.2
Tacho : 5
Cycles running : 1
TIM duty : 423
TIM val samp : 211
TIM current samp : 25604
TIM top : 50785
Comm step : 1
Temperature : 30.25
Fault : FAULT_CODE_DRV
Current : -0.6
Current filtered : -0.2
Voltage : 41.85
Duty : 0.009
RPM : 6.4
Tacho : 8
Cycles running : 2
TIM duty : 446
TIM val samp : 223
TIM current samp : 25470
TIM top : 50495
Comm step : 4
Temperature : 30.33
Fault : FAULT_CODE_DRV
Current : 0.4
Current filtered : 0.2
Voltage : 41.83
Duty : 0.008
RPM : 3.6
Tacho : 11
Cycles running : 1
TIM duty : 415
TIM val samp : 207
TIM current samp : 25646
TIM top : 50878
Comm step : 1
Temperature : 30.39
On my vesc is label turnigy and hw:4.12