You are here

GT2 Remote to Vesc connection issue

1 post / 0 new
tom.embke
Offline
Last seen: 4 years 7 months ago
Joined: 2018-04-29 20:28
Posts: 1
GT2 Remote to Vesc connection issue

Hey guys, i didnt find any FAQ that tells me where or how i should open a Thread about a problem so hopefully im on  the right spot here.

My Setup is

Vesc 4.10

Turnigy Aerodrive SK3 – 6364 – 213kv Brushless Outrunner Motor

2x ZIPPY Compact 5800mAh 10S 25C Lipo-Pack 37v

 

Everything works fine, the Motor spins in the vesc tool over the key arrow, the only Problem is that i wont get an signal of my Reely GT2 Remote or my Nyko Kama Nunchuk to the Vesc

here is a picute how i connected the receiver to my Vesc and what my Vesc Tool is showing.

https://imgur.com/ZID5V3z