Hello, I am a beginner with VESC.
My setup consists of a Classic+ controller and a Maytech MTWJ20KW boat thruster. For this test, I am using a 72V 20S NMC battery (56Ah).
I used the auto-detection feature in VESC Tool, and I am using an ADC-based throttle pedal.
The motor starts up, but I run into an issue once I push the pedal past the halfway point: the motor accelerates, but the thruster ends up churning air rather than pushing water—it looks like cavitation.
As a result, my boat doesn't go very fast—only about 10 km/h.
Do you have any idea if I might have configured something incorrectly?
thanks
