Hello people, I'm hoping someone could possibly help me before I blow another vesc.
My set up is dirt drift trike like the trampa ones.
Ad1 throttle adc2 brake
Battery is 15s lipo 45ah 5c continuous discharge
Dual skp solo's 140a output each side
Ant innovation Mp8085 130kv sensorless 6kw motors x 2
I'm on version 7.00
I have motor current at 130a abs max at 175a(recommended from skayart), it has a hard coded abs max limit of 200a
Battery max to 80a
So I'm getting cutout on hard acceleration and an abs over current fault spiking at 280a
Iv ruled out hardware as a potential fault, I did try get ai to help but it was sending me round in circles, managed to move the cutout different acceleration curve positions but no fix, in the end I just ran another setup and set it back to default.
Any help to finally fix this would be much appreciated 🙂