You are here

VESC Firmware

Topic / Topic starter Replies Last postsort ascending
Normal topic "Porting" VESC FW to physically smaller device?
by Jackl » Fri, 2020-03-13 14:04
2
by Jackl
Mon, 2020-03-16 14:52
Normal topic Flipsky HC 200A VESC programming to eFoil motor
by tylerclark » Wed, 2020-03-11 05:52
0
by tylerclark
Wed, 2020-03-11 05:52
Normal topic re-scaling CAN setDUTY CYCLE to -1 to 1 instead of 0 to 1
by a.dahhak » Fri, 2020-03-06 11:09
1
by a.dahhak
Mon, 2020-03-09 10:38
Normal topic Enabling WS2811 not working
by vitormhenrique » Thu, 2020-03-05 03:42
0
by vitormhenrique
Thu, 2020-03-05 03:42
Normal topic Cruise control button for fsesc 4.2
by bj97301 » Tue, 2020-03-03 23:13
0
by bj97301
Tue, 2020-03-03 23:13
Normal topic Duty cycle take 95% when motor released
by Rarikao » Mon, 2019-12-23 08:57
2
by agnesnorris
Sat, 2020-02-29 03:48
Normal topic Compiling corrupted firmwares...
by vitormhenrique » Sun, 2020-02-23 22:38
6
by district9prawn
Tue, 2020-02-25 23:39
Normal topic AHRS yaw drifting
by henry10210 » Sun, 2020-02-09 01:13
0
by henry10210
Sun, 2020-02-09 01:13
Normal topic MK3 branch in bldc repo?
by henry10210 » Tue, 2019-12-31 23:49
1
by Teslafly
Thu, 2020-02-06 21:22
Normal topic vesc on stm32_discovery not saving motor/app configs in non volatile memory
by Teslafly » Thu, 2020-02-06 01:23
0
by Teslafly
Thu, 2020-02-06 01:23
Normal topic Installing new VESC firmware/Bootloader, Error: Serial port error: The I/O operation has been aborted"
by Element325 » Wed, 2019-07-24 23:36
6
by frank
Mon, 2020-01-27 21:15
Normal topic VESC 6 CAN Command and Telemetry Formats
by TerraHawk » Thu, 2019-11-21 20:29
2
by Pimousse
Wed, 2020-01-22 16:10
Normal topic Hardware limits 3.66
by rumpsvett » Thu, 2020-01-16 19:50
0
by rumpsvett
Thu, 2020-01-16 22:31
Normal topic noob question - how to I update FW to 3.66?
by brently » Thu, 2020-01-16 02:22
0
by brently
Thu, 2020-01-16 02:22
Normal topic Uploading firmware bricked VESC
by daveshorts » Sun, 2018-02-04 13:35
4
by henry10210
Fri, 2020-01-10 05:27
Normal topic REVERSE FAIL in ADC_CURRENT_REV_BUTTON_BRAKE_ADC 
by dk-odense » Tue, 2019-12-17 15:45
1
by benjamin
Fri, 2019-12-27 23:09
Normal topic Dual motor setup over CAN with UART
by Pawel » Sun, 2018-06-17 11:50
5
by alex63610
Fri, 2019-12-27 14:27
Normal topic No reverse after FW update from 3.62 to 3.63
by Stupidspencer » Sun, 2019-12-15 20:34
4
by Stupidspencer
Sun, 2019-12-22 21:57
Normal topic 3.64 can_scan breaks with ppm enabled.
by fessyfoo » Fri, 2019-12-20 20:40
1
by fessyfoo
Sun, 2019-12-22 03:44
Normal topic VESC PID
by nidhirao » Tue, 2019-12-17 13:56
0
by nidhirao
Tue, 2019-12-17 13:56
Normal topic Unity FW updating bricked my 4.12 HW
by yuvikal » Thu, 2019-12-12 22:16
3
by frank
Sat, 2019-12-14 20:03
Normal topic DRV8301 Gate Drive value in Control Register
by shaman » Thu, 2019-10-17 04:22
3
by earllandry
Fri, 2019-12-13 05:06
Normal topic Spin the motor and stop at a set tachometer index
by jchillerup » Tue, 2019-12-10 12:29
1
by frank
Wed, 2019-12-11 14:51
Normal topic FEATURE REQUEST - ADC Mapping selection
by Pimousse » Thu, 2018-09-13 09:44
2
by hackish
Sun, 2019-12-08 03:53
Normal topic Firmware failure? Updating BLE trough SWD fails
by dk-odense » Wed, 2019-11-13 09:07
3
by frank
Thu, 2019-12-05 11:16
New posts
No new posts
Hot topic with new posts
Hot topic without new posts
Sticky topic
Locked topic
Subscribe to RSS - VESC Firmware