I seem to be hitting some sort of unknown limiter with battery current at 150 amps. In the second to last test in the video below (at 8:55 in), the thing just stops at 150 battery amps. Motor amp limit is 320, battery amp limit is 220 and absolute max is 380:
Hello everybody and thanks for such an outstanding project!
I am a novice DIY making my first efoil and new VESC community.
Recently, I configured and ran the three default "experiments" on my brushless sensorless motor (no load/on bench):
Can someone point me in the right direction to start troubleshooting undervoltage fault code?
I get the motor spinning with remote but intermittent fault codes. Not using a BMS.
Motor: Brushless Filipsky 65161 100KV
Input PWM: Maytech Eskate Remote VESC MTSKR2005WF V2
ESC: Firduo HL200 75V 200A ESC
Vesc tool: version 3.01
Configs: Ran motor and input wizard (PWM Current no reverse with break), adjusted motor poles to 6, set battery cutoffs for 14s9p lipo
Hello,
What is the maximum reporting frequency of eRPM over CAN ?
Hi,
I Have updated my Vesc to the latest firmware but now I cannot receive battery level or speed data to the remote. The Vesc and remote are an eovan carbon Super
Hello Community,
I'm running a Vesc HW:4.10 and FW: 5.3. I want to use an arduino to communicate with the Vesc. Currently i'm using Solid Geeks libraries but i can't realize a connection.
Can anybody help me out on this topic?
Hi!
I have an arduino that is hooked up to my ESC via PPM input, with the control type set as PID Speed Control / No Reverse.
When the arduino sends the Min/Center PPM pulse, my motor resists motion and does not spin freely.
How do I get the motor to spin freely when the arduino does not sends the 'neutral' pulse length?
Has anyone tried connecting a VESC to a Pixhawk autopilot before?
I had read that it can be done using UAVCAN, but I cannot find any documentation or tutorials on it.
If anyone has experience or knows of any resourses would be great to know.
The following hardware and tools are used.
VESC6MKV (FW version:5.3)
VESC Tool Free (version:3.01)
After writing app config to the VESC６MKV using the VESC tool, reboot the VESC6MKV will not retain the written app config and will initialize it.
*If I don't power down the VESC6MKV, it will work with the app config I wrote.
Is there any way to fix this?
Regards,
Hello, I just updated the firmware of my Maker X DV6 and the Flipsky VX3 stopped working. Same issue to a friend with the VX1. Any idea how can we solve it?
