You are here
General discussion
Log in to post new content in the forum.
| Topic / Topic starter |
Replies |
Last post | |
|---|---|---|---|
|
VESC as a grid Tie inverter by pf26 » Thu, 2022-04-07 15:20 |
6 |
by pf26 Tue, 2022-06-07 18:43 |
|
|
VESC6 Tempermental USB/Serial by protontim » Mon, 2017-10-02 22:27 |
6 |
by protontim Tue, 2017-10-10 22:31 |
|
|
search by forum by aysubscriber@ic... » Fri, 2017-10-06 20:39 |
6 |
by aysubscriber@ic... Mon, 2017-10-23 16:06 |
|
|
VESC 4.12 in a CityEL by twikis » Fri, 2018-01-12 15:54 |
6 |
by Roger Wolff Sat, 2018-01-20 16:14 |
|
|
is Cross Coupling power limitation? by ziumus » Sat, 2021-02-06 15:57 |
6 |
by ziumus Sat, 2021-02-27 16:08 |
|
|
Weird behavior when trying to do position control with the AS5047 encoders by geoporus » Thu, 2021-11-11 18:41 |
6 |
by svs Fri, 2021-12-10 04:42 |
|
|
PAS 3-wire sensor : possible to check a digital input under VESC-toool? by marc426 » Wed, 2021-10-27 00:26 |
6 |
by velolac Thu, 2021-11-25 20:09 |
|
|
external IMU vesc wiring by surfer » Wed, 2019-09-04 21:44 |
6 |
by TechAUmNu Fri, 2023-03-10 14:59 |
|
|
VESC minimum RPM by askker » Thu, 2019-07-11 05:03 |
6 |
by Artius Reynolds Sun, 2020-10-18 23:25 |
|
|
VESC stopped working, can't connect to USB by Hyperion » Mon, 2018-04-09 16:53 |
6 |
by bloggerjaan Wed, 2020-03-11 12:31 |
|
|
FOC Issue by Davideo » Mon, 2018-02-19 03:30 |
6 |
by yosoufe Thu, 2018-03-08 13:19 |
|
|
Your input needed: FESC 4.12 / Arduino / 4X 350W motors by matukash » Tue, 2020-07-21 16:36 |
6 |
by frank Fri, 2022-04-15 17:31 |
|
|
UAVCAN Versus Default VESC CAN Implementation by toma » Thu, 2019-06-13 09:17 |
6 |
by gjesusTec Tue, 2021-11-30 18:50 |
|
|
Logging IMU Data over UART by stefan_novige » Mon, 2019-08-19 18:28 |
6 |
by pf26 Tue, 2019-08-27 13:44 |
|
|
Regen on fully charged battery: soft high voltage limit by e404 » Wed, 2019-02-20 16:15 |
6 |
by Andy G Fri, 2023-10-13 14:26 |
|
|
no speed feedback in DC mode by Jessica » Mon, 2018-11-19 11:17 |
6 |
by abrac Sat, 2019-03-30 19:11 |
|
|
Can not adjust the RPM on my 1350 w motor by Arne Norway » Wed, 2019-01-09 18:47 |
6 |
by sam.vanratt Sun, 2019-01-13 13:36 |
|
|
VESC 75/300 suited for a 4.5 tonne sailboat? by Henque19 » Wed, 2019-05-22 11:10 |
6 |
by Impuls60 Fri, 2020-07-24 02:02 |
|
|
Forward/brake/reverse mode? by RDN2003 » Thu, 2019-10-03 02:13 |
6 |
by tokerodev Thu, 2025-08-21 13:55 |
|
|
Would like VESC 4.12 repair tips by spork » Wed, 2019-04-03 04:53 |
6 |
by spork Tue, 2019-04-23 11:01 |
|
|
Drive BLDC Motors from diesel engine driving 24v alternator? by skutassy » Sun, 2023-05-21 07:19 |
6 |
by Gsorter Mon, 2023-07-31 14:32 |
|
|
Motor shutting off due to FAULT_CODE_ABS_OVER_CURRENT by isso777 » Mon, 2022-01-24 13:56 |
5 |
by canoeman Thu, 2022-01-27 18:12 |
|
|
Vesc Max current 90A Vs ESC Max current 135A? by ScootScoot » Tue, 2021-12-14 13:00 |
5 |
by Markula Thu, 2021-12-16 20:42 |
|
|
IMPSM Motor and Gearing by baein » Tue, 2022-01-25 11:19 |
5 |
by Rohan_Suresh_babu Sat, 2024-03-02 12:18 |
|
|
Logging additional Sensors with the VESC on the Phone App by palm369 » Sat, 2024-07-13 19:10 |
5 |
by palm369 Sun, 2024-11-10 13:13 |
Log in to post new content in the forum.
