You are here

Vesc Six won't run or flash firmware

7 posts / 0 new
Last post
Grimjovv
Offline
Last seen: 2 months 2 weeks ago
VESC Original
Joined: 2017-06-09 15:32
Posts: 17
Vesc Six won't run or flash firmware

I can't seem to get the software to connect without being limited because of out of date firmware. I downloaded the new software but it still won't upload the new firmware to the Vesc.  Keeps throwing errors and won't connect without a power cycle. Is it possible to check if it has a bootloader or not?

It claims to have FW 3.24 with bootloader 60

Pimousse
Offline
Last seen: 10 months 2 weeks ago
VESC Original
Joined: 2017-05-24 12:15
Posts: 101

This thread may help you :

http://vesc-project.com/node/47

Grimjovv
Offline
Last seen: 2 months 2 weeks ago
VESC Original
Joined: 2017-06-09 15:32
Posts: 17

Thank you, I figured that's what it was just needed a second opinion :) I overlooked that post 3 times lol guess I have selective sight when tired. I have the board working for now on lipo's till I can find a BMS for my Li ion.

MARK EVERITT
Offline
Last seen: 6 years 4 months ago
Joined: 2017-08-02 00:34
Posts: 4

I have the same issue here. But im not authorized to view the link to the other thread.

Danny Bokma
Offline
Last seen: 11 months 5 days ago
VESC Original
Joined: 2017-05-24 12:11
Posts: 53

Power cycle your VESC such that you can connect to it again.

Connect

Go to "Firmware" menu and go to the "Bootloader" tab, now hit the flash button in the bottom right corner. This process is really fast, once finished you have a VESC with bootloader.

Now you van flash the new firmware version.

MARK EVERITT
Offline
Last seen: 6 years 4 months ago
Joined: 2017-08-02 00:34
Posts: 4

Yes just worked that out. magaged to find the post linked above. Many thanks

Its always a worry to do something that the software says will ruin everyhting. now for the fun of getting it allsetup in the morning and a ride out me thinks.

The Vescs i have are the ones that came into Trampa monday an di got them tuesday.

Laters

Danny Bokma
Offline
Last seen: 11 months 5 days ago
VESC Original
Joined: 2017-05-24 12:11
Posts: 53

Yes, all VESC 6's shipped to date ( BETA and last Trampa batch) don't have a boot loader. Trampa (they learned this during BETA, Benjamin had to add the flash firmware function to the VESC-tool because of this) knew this but was unwilling to spend the extra minute on the new batch to do this step during testing.

Now every new user will have to make this scary step.