You are here

Need help to configure the regenerative brake ...

3 posts / 0 new
Last post
Loops
Offline
Last seen: 1 year 8 months ago
Joined: 2018-04-20 13:09
Posts: 4
Need help to configure the regenerative brake ...

Hello all !

First, i'm sorry for my aproximative english.

I've build a E-mountainboard. The setup is :

- 2 SK8 6374 130KV (sensored)
- 2 FLIPSKY FSESC 6.6
- 12S Lipo

I will try to explain you my problem ...

All works perfectly ... I'm ridding, I've the throttle at 50% (for example). If i release the throttle, the board continue in 'free weels" ... But if i accelerate with a throttle less than before, 25% for example, the board will brake ... 

Is there a way to brake only if i put the throttle in reverse ?

Thank you a lot for your help, i hope you can understand my problem.

++
JC

 

frank
Offline
Last seen: 3 weeks 3 days ago
VESC BronzeVESC FreeVESC GoldVESC OriginalVESC PlatinumVESC Silver
Joined: 2016-12-27 20:19
Posts: 847

Do the standard setup and choose " Current no reverse with brakes" or "Current Hyst. reverse with brakes".

https://vesc-project.com/node/178

 

Loops
Offline
Last seen: 1 year 8 months ago
Joined: 2018-04-20 13:09
Posts: 4

Thank you for your help.

The configuration in the ESC is "Current no reverse with brakes". I will try ASAP the other mode.