i want to move the I2C pins from PORTB 10/11 to PORTB 8/9. I have no CAN device, so this PINS are free to use.
#define HW_I2C_DEV I2CD1
#define HW_I2C_GPIO_AF GPIO_AF_I2C1
#define HW_I2C_SCL_PORT GPIOB
#define HW_I2C_SCL_PIN 8
#define HW_I2C_SDA_PORT GPIOB
#define HW_I2C_SDA_PIN 9
and enable I2C1 in mcuconf.h
but now signal on this pins :( is it correct, that the defines for the PINs and PORTs are nowhere used in the code ? grep found no match
do i have to change something more ?