You are here

VESC & CAN Bus Communication to another MCU (NOT VESC)

6 posts / 0 new
Last post
Jack_Li
Offline
Last seen: 4 years 11 months ago
Joined: 2019-07-01 05:03
Posts: 12
VESC & CAN Bus Communication to another MCU (NOT VESC)

Hey, guys, how to use VESC & CAN Bus Communication to another MCU (NOT VESC)? Old forums can't be displayed. Can you provide any useful information? Be deeply grateful

eguven
Offline
Last seen: 3 months 3 weeks ago
VESC Free
Joined: 2020-02-11 09:15
Posts: 11

Hello Alex

 

Have you had any progress with your project?

 

Cheers ,

Emrah 

eguven

tecnico.solarboat
Offline
Last seen: 2 years 10 months ago
VESC Original
Joined: 2018-06-28 14:43
Posts: 19

I saw this excel file somewhere on the internet. It should have everything you need to control your VESC over CAN. The link on the excel file is also pretty useful. We are able to control our VESCs over CAN with information provided on that file.

VESC_CAN_Status_Frames.xlsx_.zip

hakan seray
Offline
Last seen: 2 years 5 months ago
Joined: 2022-01-31 05:39
Posts: 4

Ankara'dan Hakan Seray Şibik .

Arkadaşlar sizden bir ricam var emrah güven ile iletişime geçmek istiyorum

E-posta adresini bilen varsa, yardımcı olabilirse minnettar olurum. Saygılarımızla

hakan seray şibik .

 

seray

mm_iem
Offline
Last seen: 1 year 4 months ago
Joined: 2021-05-31 10:01
Posts: 5

Hello,

I did the same I am controlling the VESC with an external STM32H745 Board and CANBUS.

We are sending the set_current and set_current_brake command.

David_1
Offline
Last seen: 7 months 23 hours ago
Joined: 2022-06-17 18:51
Posts: 5

Can commands.. trying not to hijack thread but :)

With the Vesc tool you can set various parameters, Can these also be set with the can bus... if so How ??? :)

Thanks

David