You are here

4. Input Wizard for NRF remote

Submitted by frank on Fri, 2019-05-24 16:32

Configuration of your VESC® or VESC® based ESC using the VESC®-Tool Software.


In this tutorial we will configure a single, genuine VESC® motor controller in combination with a NRF signal based radio controller in Current No Reverse with Brake mode.

Make sure to use the latest VESC-Tool version!

Download from http://www.vesc-project.com/vesc_tool


Vesc-Tool_ISW_start


Vesc-Tool_ISW_wiring


VESC_MW_00


VESC_IW_01


VESC_IW_02


VESC_IW_02


VESC_IW_02


Vesc-Tool_ISW_dropdown


Vesc-Tool_ISW_dropdown


 

Congratulations, your VESC is now ready to operate. If you like you can follow the
Additional settings manual for further improvements.