You are here

I can't communicate with the VESC-Clone

2 posts / 0 new
Last post
Savavit
Offline
Last seen: 1 year 2 months ago
Joined: 2019-09-27 08:16
Posts: 2
I can't communicate with the VESC-Clone

When I received the FSESC 4.12 I connected it to the PC via USB, I updated the firmware and started the motor using the computer arrow buttons.

Today I tried to reconnect but the VESC Tool does not recognize the VESC.

The USB port is detected by Windows and when I remove power from the VESC I see that its USB port disappears from the management of Windows devices.

The COMM number is correct and the speed is at 115200.

But the VESC Tool does not communicate.  The message is:

Could not read firmware version. Make sure that the selected port really belongs to the VESC.



Please help me.

vadicus
Offline
Last seen: 11 hours 28 min ago
VESC Free
Joined: 2018-08-17 07:26
Posts: 228

Have you tried to upload the firmware?