You are here

Axial Flow Pump Project

3 posts / 0 new

Log in or register to post comments

Last post

Thu, 2021-12-09 02:05

#1

design@imsltd.co.nz

Offline

Last seen: 2 years 11 months ago

Joined: 2021-07-20 03:35

Posts: 2

Axial Flow Pump Project

Hi All

We are experimenting on an axial flow pump using the Flipsky 65121 120kV motor & 200A FSECS (see Image below)

For our testing we used a servo tester to start/stop the motor. This worked OK during our testing.

We now wish to be able to simply switch the motor on/off with a toggle type switch.

Can anyone offer a way we can simply switch the motor on/off?

Thanks for that

David

20211209_135230 (Large).jpg

Thu, 2021-12-09 11:47

#2

skyline1970

Offline

Last seen: 4 months 2 weeks ago

Joined: 2017-09-07 22:28

Posts: 232

A high side switch could be used as solid state on off device.

if a pot would been used as speed ref, it could be made 0v on the ref. to make a stop.

Fri, 2021-12-10 01:51

(Reply to #2) #3

design@imsltd.co.nz

Offline

Last seen: 2 years 11 months ago

Joined: 2021-07-20 03:35

Posts: 2

OK - thanks. Will give it a go.