You are here

Always get Fault:DRV in FOC mode during startup .

4 posts / 0 new
Last post
stone_1706
stone_1706's picture
Offline
Last seen: 5 years 2 weeks ago
Joined: 2019-01-17 05:37
Posts: 11
Always get Fault:DRV in FOC mode during startup .

]

Hello ,

  I diy a VESC6 board and double checked schematic and PCB, it looks good.

 In FOC mode ,I got Fault:DRV during startup every time, during in BLDC mode  it work fine and detect motor R,L is OK.

What's going on in FOC mode ? ....software problem ? hardware problem ?

:-(....

Stone

 

 

stone_1706
stone_1706's picture
Offline
Last seen: 5 years 2 weeks ago
Joined: 2019-01-17 05:37
Posts: 11

I do not want to modify DRV8301 chip setting ,because the default setting of DRV chip is OK, ,so in my design I remove SPI signals for DRV8301.

Is it OK ?

 

sam.vanratt
Offline
Last seen: 10 months 4 weeks ago
Joined: 2018-11-18 14:09
Posts: 83

Hi Stone

did you try to man. set a different diagnostic setup (I, eRPM, ....)?

Cheers

Sam

Pedelec usage in combination with a GoldenMotor MagicPie3 BLDC

stone_1706
stone_1706's picture
Offline
Last seen: 5 years 2 weeks ago
Joined: 2019-01-17 05:37
Posts: 11

HI Sam

I will try it .

Thanks for your reply.

Stone.