You are here

75 V 300 A only reading MOSFET temperature 1 in VESC Tool

1 post / 0 new
ryanbohm
Offline
Last seen: 3 months 2 weeks ago
VESC Free
Joined: 2024-01-24 09:41
Posts: 1
75 V 300 A only reading MOSFET temperature 1 in VESC Tool

Hi,

I have built hardware to the 75 V 300 A schematic (https://vesc-project.com/sites/default/files/Benjamin%20Posts/vesc_75_30...), and am able to load firmware and connect using VESC Tool. I have tried version 6.02 in the 75_300_R1, 75_300_R2, and 75_300_R3 versions. They all read Temperature MOSFET and Temperature MOSFET 1 and respond appropriately to heating of the thermistor. But the other two temperature probes don't register anything. I've triple-checked that my implementation matches the schematic. What could I be missing?

Here's a screenshot in VESC Tool: https://www.dropbox.com/scl/fi/t0fc5k3cm7c3h388pu32j/VESC-Tool-Temperatu...

Thanks in advance.