You are here

i try, i try but...

1 post / 0 new
rastafouille
Offline
Last seen: 11 months 3 weeks ago
Joined: 2023-10-03 21:11
Posts: 1
i try, i try but...

Hello,

I begin a new autonomous rc car project and i need to use VESP tool with a Flipsky fsesc 4.12 and T2M Rush Motor Stock TETC France 17.5T

https://flipsky.net/collections/electronic-products/products/aluminium-case-fsvesc

https://www.rcteam.com/moteurs-brushless-110/35775-t2m-rush-moteur-stock-tetc-france-175t-3410569730619.html

- VESC® Tool 6.02 installation on wondows DONE

 - USB connection DONE

- detect parameter ERROR :

detect-error

- Motor wizard ERROR :

motor-error
Phase graph :
phase-graph

-> hw_status COMMAND :

Firmware: 6.2

Hardware: 410

UUID: 32 00 45 00 03 50 4D 53 47 34 33 20

Permanent NRF found: No

Phase Shunts: No

Odometer : 0 m

Runtime : 763 s

FOC Current Offsets: 2954.26 2053.39 0.00

FOC Voltage Offsets: 0.0992 -0.1963 0.0971

FOC Voltage Offsets Undriven: 0.0000 0.0000 0.0000

USB config events: 1

USB write timeouts: 0

Current Measurement Range: 165.0 A

Voltage Measurement Range: 61.8 V

Dead time: 360 ns

Mempool mcconf now: 0 highest: 2 (max 9)

Mempool appconf now: 0 highest: 0 (max 2)

I dont now what to do, thanks for your help !