Hey guys,
So I installed new motors on my build and when I hooked up my vesc's to vesc tools, I received the error that my firmware was old and I needed to update. (FW3.26) ( HW410)
On my master vesc, everything worked out fine it is now running 3.29. My slave foc seems to show signs of a missing bootloader. I go to update the firmware it shows complete, the vesc shuts off but does not restart.
I know the vesc tools offers the bootloader option when doesnt seem to do anything. I am currently stuck in an endless cycle of "old firmware" on this 1 focbox.
Can someone help guide me in the right direction? Any help is greatly appreciated.
Or does anyone know where I can download the 3.26 BIN for Hw410 and the version of tools that is compatible.
-Chris
Well, probably your ESC had a bootloader and now you messed it up through the bootloader update. There was a warning popping up.
You will need an ST-Link V2 to fix this.
http://www.vesc-project.com/comment/225#comment-225
Frank
An dif its a V4.xx this is the bootloader: http://vedder.se/forums/viewtopic.php?t=17
Starting Address is 0x080E0000 .
Frank