C80100 Outrunner 50kv does not want to spin.

2 posts / 0 new

Last post

Sun, 2019-03-03 10:30

Wormsnake

Offline

Last seen: 4 years 2 months ago

Joined: 2018-05-29 15:37

Posts: 2

C80100 Outrunner 50kv does not want to spin.

Hi I have VESC HW V4.12 and C80100 Outrunner 50kv motor and I have a problem the motor does not want to run. The KEDA 63-64 190KV engine works normally. Is not the problem in too low KV? I tried 3s LIPO 4S LIPO and 11S LIPO and the engine is not running. The KEDA engine runs smoothly on 3s LIPO. What to set up to make C80100 Outrunner 50kv to work?

Sun, 2019-03-10 17:54

TheFallen

Offline

Last seen: 2 months 2 weeks ago

Joined: 2017-09-11 11:46

Posts: 222

I'm not sure it's the low kv. I've run about 8x 100kv c80100 motors on VESCs of various types.

What kinda errors/faults do you get?

You are here

C80100 Outrunner 50kv does not want to spin.