You are here

VESC with 3 shunt

1 post / 0 new
_johnny_
Offline
Last seen: 7 months 3 days ago
Joined: 2019-09-17 12:12
Posts: 3
VESC with 3 shunt

Hi, i compiled VESC using ac64stm32 with hw_60 included. This configuration using 3 shunts so i installed 3x ACS758 on phase wires. VESC tool show mi that controller measured offset voltage at half supply voltage. 

When i connected input signals to 3 potentiometer, only on 2 phases in vesc tool i saw changes.

My question is why i cannot see changing current on each single phase?