You are here

Red Flashing Light?

3 posts / 0 new
Last post
givol
Offline
Last seen: 4 years 2 months ago
Joined: 2019-06-23 03:57
Posts: 3
Red Flashing Light?

I have 2 of the VESC's you can buy from TorqueBoards.

https://diyelectricskateboard.com/collections/esc-speed-controller/products/torque-esc-bldc-electronic-speed-controller

I have been struggling to get my 2 motor setup to work. I have the can-bus and nothing seens to work like the tutorials tell me.  So I have resorted to trying to run them indivually just to make sure they work. One of them, the one i was using as the slave, blinks red every time I try to control it with the remote, I have tried it has both the Slave and the Master. (No CAN-bus connected)  Any clue what the red light means? Am I screwed and have to spend another $100?

givol
Offline
Last seen: 4 years 2 months ago
Joined: 2019-06-23 03:57
Posts: 3

Does really no one know what the issue is?

frank
Offline
Last seen: 6 days 22 hours ago
VESC BronzeVESC FreeVESC GoldVESC OriginalVESC PlatinumVESC Silver
Joined: 2016-12-27 20:19
Posts: 846

You need to get in touch with Torqueboards. Red flashing led points to faulty hardware. This is third party hardware and support should be given by the vendor.