You are here

Home

3. Input Setup Wizard for single VESC using a PPM signal radio controller

Submitted by frank on Tue, 2017-10-03 19:50

Configuration of your VESC® or VESC® based ESC using the VESC®-Tool Software.

In this tutorial we will configure a single, genuine VESC® motor controller in combination with a PPM signal based radio controller in Current No Reverse with Brake mode.

Make sure to use the latest VESC-Tool version!

Download from http://www.vesc-project.com/vesc_tool

Vesc-Tool_ISW_start

Vesc-Tool_ISW_wiring

Vesc-Tool_ISW_connect

Vesc-Tool_ISW_welcome

Vesc-Tool_ISW_load default

Vesc-Tool_ISW_select single vesc

Vesc-Tool_ISW_select ppm

Vesc-Tool_ISW_dropdown

Vesc-Tool_ISW_current no reverse brake

Vesc-Tool_ISW_mapping_01

 

Make sure your radio is in FAST mode when doing the next steps!
Some radios have a switch to enable a SLOW or FAST mode.
Some radios require you to push the on/off button a second time, after powering on the device.

 

Vesc-Tool_ISW_mapping_02

 

Vesc-Tool_ISW_mapping_03

Vesc-Tool_ISW_mapping_04

Vesc-Tool_ISW_mapping_05

Vesc-Tool_ISW_mapping_06

Vesc-Tool_ISW_finish

Congratulations, your VESC is now ready to operate. If you like you can follow the
Additional settings manual for further improvements.

Comments

Thanks to you, I know how to set up the input for VESC, I strands really need to set up my VESC and I'm lucky to know how to do it today, through this article I have to thank you very much for helping me. Share this to everyone.

Get ready for endless fun with Slope ! Navigate a ball through an ever-changing, fast-paced slope filled with obstacles. The game’s increasing speed and difficulty will test your reflexes and skills.

 

I deeply value your thoughtful evaluation of my request and your willingness to offer any aid you are able to provide. We value your thoughtful recommendations. space waves

@geometry dash Its blend of challenging gameplay, rhythmic music, and a strong community has made it a beloved title in the platformer genre.

Pages