You are here

Brose motor + flipsky pro v2

4 posts / 0 new
Last post
Rokabilly76
Offline
Last seen: 9 months 4 weeks ago
Joined: 2024-01-03 19:24
Posts: 3
Brose motor + flipsky pro v2

Hi everyone, I'm working on a brose motor , in FOC mode  don't have a problem for identify de parameters of motor, because it's automatic,but I don't know what type of inneruner motor have to choose, it's important? 750gr or 2000gr.

The BMS it's a daily 13s 50Ampers.

And de pulleys size , it's only for de velocity or it's relevant for the motor running?

In few moments I put photos from vesc tool

electricfox
electricfox's picture
Offline
Last seen: 3 hours 15 min ago
VESC Original
Joined: 2019-01-01 17:11
Posts: 119

Its important for the detection. 750gr. should be fine. Infos about pulley size/gear ratio/wheel diameter is only for your displayed speed etc.

Rokabilly76
Offline
Last seen: 9 months 4 weeks ago
Joined: 2024-01-03 19:24
Posts: 3

Add some automatic settings in FOC mode.

IMG20240106111830.jpg

Rokabilly76
Offline
Last seen: 9 months 4 weeks ago
Joined: 2024-01-03 19:24
Posts: 3

IMG20240106111943.jpg