Normal topic
|
Improper feedback from VESC Hardware with low speed ( SensorlessBEMF ) by Pranit Bhamare on Tue, 2023-02-14 07:19 |
General discussion |
Normal topic
|
VESC Tool Control Theory by AeonCypher on Sun, 2023-02-12 23:54 |
VESC Tool |
Normal topic
|
Is it normal to have5th harmonic current ? by Alex Marques on Fri, 2023-02-10 16:01 |
General discussion |
Normal topic
|
Noobs need to update and / or configure old VESC 4.12 by Loops on Tue, 2023-02-07 11:49 |
VESC Tool |
Normal topic
|
duty cicle 95% but current not at max by rodrigo.baronio on Mon, 2023-02-06 15:52 |
VESC Tool |
Normal topic
|
HFI when battery voltage is below HFI start voltage by rainebk@bigpond... on Thu, 2023-02-02 11:50 |
General discussion |
Normal topic
|
Lehner TorQstar any experience by fabu80 on Wed, 2023-02-01 08:35 |
General discussion |
Normal topic
|
Flipsky 4.20 plus with VX1 pro remote by Tropicalstorm on Tue, 2023-01-31 21:30 |
General discussion |
Normal topic
|
FSESC 4.2 motor power limited in sensored mode by motion_sickness on Mon, 2023-01-30 01:47 |
Third Party Hardware |
Normal topic
|
Motor not running after applying SINE/COSINE settings by DHOUT on Fri, 2023-01-27 03:32 |
VESC Tool |
Normal topic
|
Any way to increase detection time? by VapeGod on Wed, 2023-01-25 05:58 |
General discussion |
Normal topic
|
Fsesc 4.20 plus aiuto by sandrino on Sun, 2023-01-22 20:50 |
Third Party Hardware |
Normal topic
|
Hall sensor data is all 0. What do? by Byproduct on Sat, 2023-01-14 14:39 |
VESC Tool |
Normal topic
|
Fault Code Look Up Table (for CSV, Excel or Similar) by JayCee on Wed, 2023-01-11 04:26 |
General discussion |
Normal topic
|
IMU not working after power cycle by Lennart Duijn on Mon, 2023-01-09 22:08 |
VESC Tool |
Normal topic
|
Recommended method for CAN Bus communication for 3 VESC by sivanhere on Sun, 2023-01-01 12:09 |
General discussion |
Normal topic
|
How to implement a simple autopilot by oangelo on Thu, 2022-12-22 12:50 |
General discussion |
Normal topic
|
Need help with brushed fc 24 bolt motor control by searth on Sun, 2022-12-18 16:05 |
General discussion |
Normal topic
|
Impact of motor resistance value vs temperature by Torbjorn on Fri, 2022-12-16 09:09 |
General discussion |
Normal topic
|
Setting PID gains (and other config parameters) over CAN Bus by TheCuriousRobot on Thu, 2022-12-15 22:03 |
General discussion |