Normal topic
|
Wrong Motor/Battery Amps Measured? by King John on Thu, 2020-01-23 04:51 |
Third Party Hardware |
Normal topic
|
FOC Encoder autotune issue by David_Lo on Tue, 2020-01-21 11:54 |
VESC Tool |
Normal topic
|
Vesc_tool running error by kwlimm on Sun, 2020-01-19 10:01 |
General discussion |
Normal topic
|
Freewheeling by Stianaj on Fri, 2020-01-17 19:15 |
VESC Tool |
Normal topic
|
Hardware limits 3.66 by rumpsvett on Thu, 2020-01-16 19:50 |
VESC Firmware |
Normal topic
|
VESC tool load empty by arminoonk on Thu, 2020-01-16 14:51 |
VESC Tool |
Normal topic
|
custom firmware by vufmihai on Thu, 2020-01-16 09:06 |
General discussion |
Normal topic
|
current control mode with duty cycle limit based on throttle by devin on Thu, 2020-01-16 05:45 |
General discussion |
Normal topic
|
noob question - how to I update FW to 3.66? by brently on Thu, 2020-01-16 02:22 |
VESC Firmware |
Normal topic
|
arrow key hot working (neither on the app) but the board works correclty by lorenzidomenico94 on Tue, 2020-01-14 11:30 |
VESC Tool |
Normal topic
|
How to set up RF receiver for PPM or UART input? by adamdorr on Tue, 2020-01-07 16:23 |
General discussion |
Normal topic
|
Balance App by EVolution EV on Tue, 2019-12-31 05:11 |
VESC Tool |
Normal topic
|
Reset parameters by nidhirao on Mon, 2019-12-23 10:57 |
VESC Tool |
Normal topic
|
VESC PID by nidhirao on Tue, 2019-12-17 13:56 |
VESC Firmware |
Normal topic
|
VESC PID by nidhirao on Tue, 2019-12-17 10:13 |
VESC Tool |
Normal topic
|
Motor controller commercial test benches by lopezcontreras on Mon, 2019-12-16 15:31 |
Third Party Hardware |
Normal topic
|
DRV8302 Gate Pin output waveform is abnormal by yandongyu1998 on Fri, 2019-12-13 07:21 |
General discussion |
Normal topic
|
Calculator by kstuck on Tue, 2019-12-10 18:30 |
General discussion |
Normal topic
|
DC MOTOR connected to FLIPSKY 4.20 MINI by CatalinCHIRICA on Mon, 2019-12-02 18:20 |
VESC Tool |
Normal topic
|
Can bus communication. by Piamen on Wed, 2019-11-27 06:47 |
General discussion |