You are here
Third Party Hardware
Log in to post new content in the forum.
Topic / Topic starter |
Replies | Last post | |
|---|---|---|---|
|
DIY vesc 75/300 variant power stage problem by motordriver111 » Sat, 2021-03-27 21:44 |
2 |
by vadicus Tue, 2021-04-06 18:50 |
|
|
DIYElectricSkateboard.com Torque Board Street: DOA by epretorious » Thu, 2022-06-02 17:54 |
3 |
by frank Sat, 2022-06-04 11:50 |
|
|
Does the blue tooth adapter from Flipsky now work with Iphone? by Don124 » Thu, 2022-06-23 07:50 |
1 |
by oskkis Wed, 2022-08-17 18:48 |
|
|
Driving 2 BLDC motors with one MCU by Pimousse » Tue, 2018-06-26 15:42 |
13 |
by wkt Wed, 2018-10-17 14:02 |
|
|
Driving Issues Due To Reversed Current Amplification by F4metz » Mon, 2018-12-17 16:45 |
1 |
by moto_guy Sun, 2019-03-17 02:39 |
|
|
Driving the FETs.... by Roger Wolff » Sat, 2017-10-21 16:37 |
17 |
by Roger Wolff Mon, 2017-12-11 20:55 |
|
|
Duel FSESC 4.12 to Flipsky VX1 Connection issue by Yafman » Mon, 2021-05-31 13:30 |
1 |
by neo Tue, 2021-06-15 02:43 |
|
|
E-bike with Ubox board by tailele » Wed, 2020-11-18 11:48 |
6 |
by kevingraehl Thu, 2022-01-13 09:24 |
|
|
EBESC 6.1 Remote wont connect and cant get past the error code port not recognized by flashg69777 » Tue, 2019-10-22 02:01 |
1 |
by frank Tue, 2019-10-22 11:13 |
|
|
Enduro-grade Display by dron_pablo » Fri, 2021-02-05 21:08 |
4 |
by vadicus Thu, 2024-01-11 22:12 |
|
|
ESC ceases operation after 40 sec ride by dekafive » Sun, 2019-08-25 22:25 |
1 |
by frank Mon, 2019-09-02 10:50 |
|
|
Esc does not reply by nemethLali » Sun, 2021-08-01 16:07 |
1 |
by nemethLali Fri, 2021-08-06 22:18 |
|
|
External power-side board by HansPeterHaastrup » Mon, 2018-07-30 14:53 |
5 |
by HansPeterHaastrup Mon, 2018-07-30 18:23 |
|
|
F50-300 (Design Not Tested yet) by mrendu43 » Tue, 2021-03-09 11:49 |
13 |
by mrendu43 Sat, 2021-05-01 17:15 |
|
|
FAULT CODE UNBALANCED CURRENT by NOAI » Mon, 2024-03-25 09:30 |
0 |
by NOAI Mon, 2024-03-25 09:30 |
|
|
Fault finding on failed VESC by dmcke5 » Sun, 2019-02-17 01:57 |
2 |
by benjamin Wed, 2019-03-13 10:00 |
|
|
FAULT_CODE_ABS_OVER_CURRENT on custom pcb by TVAVAE » Sat, 2021-07-10 00:44 |
9 |
by hakan seray Wed, 2022-06-15 12:27 |
|
|
Firmware flash on new born board by matrixgti » Thu, 2020-10-08 20:39 |
2 |
by TechAUmNu Tue, 2020-10-13 10:18 |
|
|
Flipsky 4.12 suddenly/randomly brakes by MetaMind » Thu, 2019-07-18 17:01 |
1 |
by TechAUmNu Sat, 2019-07-20 23:36 |
|
|
Flipsky 4.12 Vesc in FOC mode? by Jonny254 » Sat, 2018-09-08 11:25 |
3 |
by Jonny254 Thu, 2018-09-13 05:48 |
|
|
Flipsky 6.6 no green/red led only blue by vic1234 » Thu, 2022-05-19 20:46 |
0 |
by vic1234 Thu, 2022-05-19 20:46 |
|
|
Flipsky 75100 by Alexkat » Thu, 2022-05-26 18:40 |
1 |
by oroneli Fri, 2024-05-03 09:47 |
|
|
Flipsky 75100 rebooting under load by SpacePT » Tue, 2022-07-26 14:47 |
0 |
by SpacePT Tue, 2022-07-26 14:52 |
|
|
Flipsky 75100 with Flipsky VX1 remote -- do I have the wiring right? (VESC4 connector) by SeguinM » Sun, 2022-08-07 15:32 |
0 |
by SeguinM Sun, 2022-08-07 15:32 |
|
|
Flipsky 75200 + Flipsky 85135 12kw only 2kw output by giver » Thu, 2022-10-27 21:00 |
1 |
by skyline1970 Thu, 2022-11-24 20:08 |
Log in to post new content in the forum.
