You are here

VESC Original Hardware

Topic / Topic starter Replies Last postsort descending
Normal topic VESC 4.12 wont connect to pc
by stefann » Sun, 2020-03-15 00:42
0
by stefann
Sun, 2020-03-15 00:42
Normal topic Bug with bluetooth app connect
by zmei116 » Tue, 2020-03-17 13:06
0
by zmei116
Tue, 2020-03-17 13:06
Normal topic Vesc 6.4 has 80A continuous current. Is that battery or motor?
by MaxMaker1 » Mon, 2020-03-02 23:35
1
by velolac
Sun, 2020-03-29 17:51
Normal topic Speed Pin from motor into VESC 6+?
by dfelz » Tue, 2020-04-07 23:42
1
by frank
Mon, 2020-05-04 14:50
Normal topic VESC 6, astroflight 3215, loosing sync with freewheel
by Rouckie » Mon, 2020-05-11 00:22
0
by Rouckie
Mon, 2020-05-11 00:22
Normal topic VESC 75/300 singnal connectors
by Mikko Valtonen » Tue, 2020-05-19 21:43
0
by Mikko Valtonen
Tue, 2020-05-19 21:43
Normal topic Setting up a VESC 6 MK IV and need 58.2 voltage fault
by warrenhdavis » Fri, 2020-05-22 07:34
2
by TheFallen
Wed, 2020-05-27 08:59
Normal topic Why android app doesn't save the BALANCE settings in the motors profile? Is it a BUG?
by zmei116 » Fri, 2020-05-29 23:31
0
by zmei116
Fri, 2020-05-29 23:31
Normal topic Why android app doesn't save the BALANCE settings in the motors profile? Is it a BUG?
by zmei116 » Sat, 2020-05-30 12:43
0
by zmei116
Sat, 2020-05-30 12:43
Normal topic Vesc 6 MKIV ?
by mchatain » Mon, 2020-05-04 11:43
3
by maxpla
Wed, 2020-06-10 10:04
Normal topic 75/300 R3 with Original FW 4.2 can't update
by nice2cu » Sun, 2020-06-14 17:26
1
by nice2cu
Mon, 2020-06-15 20:41
Normal topic 75/300 R3 Power ON/OFF PINs and LED Status
by nice2cu » Wed, 2020-06-17 17:35
0
by nice2cu
Wed, 2020-06-17 17:37
Normal topic VESC 75/300 as generator inverter troubleshooting
by Renco » Thu, 2020-06-18 13:10
2
by Renco
Wed, 2020-06-24 08:50
Normal topic VESC Connect - What is UART_TX_DISABLED for ?
by Pimousse » Fri, 2020-07-10 15:10
0
by Pimousse
Fri, 2020-07-10 15:10
Normal topic VESC hw4.7 firmware update in vesc tool (2.06) fails with "Erase timed out"
by snowcrazed » Thu, 2020-07-23 05:47
1
by snowcrazed
Mon, 2020-07-27 04:02
Normal topic Smoked 3 month old VESC - What did I do wrong?
by cjjohnson97 » Thu, 2020-04-16 02:30
1
by velolac
Sun, 2020-08-02 11:27
Normal topic optimizing the set up to reduce mosfet heating
by tromes » Tue, 2020-06-16 02:48
2
by TechAUmNu
Sun, 2020-08-02 15:06
Normal topic Independent external power for VESC 6 MK3?
by henry10210 » Sun, 2020-08-02 00:27
1
by TheFallen
Sun, 2020-08-02 16:11
Normal topic Problems reaching theoretical max (150k) ERPM on VESC6
by ignaciobfp » Sun, 2020-07-26 19:10
4
by ignaciobfp
Fri, 2020-08-07 16:52
Normal topic VESC 75/300 liquid cooling
by niekvanprooijen » Mon, 2019-09-09 19:15
4
by Mikko Valtonen
Mon, 2020-08-17 07:21
Normal topic burnend vesc6 mk3
by sandmen » Mon, 2020-08-17 11:48
0
by sandmen
Mon, 2020-08-17 11:48
Normal topic VESC VI plus - No usable power / under voltage fault after pwr delivery
by velolac » Sun, 2020-07-12 19:37
1
by velolac
Sat, 2020-08-29 21:51
Normal topic Do you know how wire simultaneously bluetooth module and 9dof sensor? Bluetooth now connected to TX RX, but it is the same pins
by zmei116 » Thu, 2020-08-27 18:02
2
by TheFallen
Sun, 2020-08-30 19:33
Normal topic Why does the 75/300 have VCC at 3.4V?
by TechAUmNu » Tue, 2020-03-31 14:01
3
by TechAUmNu
Wed, 2020-09-02 12:04
Normal topic 75/300 Layout or gerbers
by Chapel81 » Fri, 2020-08-28 21:27
3
by Chapel81
Wed, 2020-09-09 16:24
New posts
No new posts
Hot topic with new posts
Hot topic without new posts
Sticky topic
Locked topic
Subscribe to RSS - VESC Original Hardware